I cantry torequestthe source codeof the virus.
I understand thatit is not possiblethat the virus couldchange theHyperV code. Lose thecertification. Windows will notload it.
NOTE: ring -1wasfor instancesimplifying.
Re: vmware and hyper-v
↧
↧
Re: vmware and hyper-v
jmtella wrote:
I cantry torequestthe source codeof the virus.
That would be splendid. Thanks!
I understand thatit is not possiblethat the virus couldchange theHyperV code. Lose thecertification. Windows will notload it.
I was thinking of changing the code after it's been loaded into memory. Of course, then you might also have to defeat the Hyper-V equivalent of PatchGuard, if there is one.
↧
Re: vmware and hyper-v
Bad news:Iwill notallow accessto the code. I'll keeptrying.
But Iconfirm thatcoexists withHyperVwithout interferingat all withit orpatch it
Regards.
↧
Re: vmware and hyper-v
Can you confirm that it works under UEFI?
↧
Re: vmware and hyper-v
Yes.
Regards,
↧
↧
Re: vmware and hyper-v
One more thing. "Workstation runnestedguestsunderHyper-V usingbinarytranslation"byvmx.allowNested= TRUE
Does not work onTech Preview. Blue screen.
↧
Re: vmware and hyper-v
Can you post the blue screen?
↧
Re: VMware workstation on Xensever VM
Thank you, will post a question there.
↧
Re: vmware and hyper-v
↧
↧
Re: Loading module megaraid_sas
Контроллер живой, но ничего так и не помогло.
Сдался, купил Adaptec ASR-6805E, все заработало, как часы.
↧
Re: Fully connecting directly attached datastores in an ESXi cluster?
I am following the brownfield process. It turns out there is a KB article on what the VSA setup process is referring to when it warns of erasing data:
Existing VMs not stored on the VSA appliances were not harmed by the deployment.
↧
vmrun with encrypted machines
Hello everybody,
I'm a bitstuck withthe use ofencryptedmachines andvmrun.
According to informationsI have, a encryptedvirtual machines must be started withthe -vp parameter.
with this command line:
"C:\ProgramFiles\VMware\VMwareVIX\vmrun.exe"-T player -vppasswordstart "C:\Users\Administrator\Documents\VirtualMachines\win.vmx"
I havethe error message: The operationis not supported.
with this command line:
"C:\ProgramFiles\VMware\VMwareVIX\vmrun.exe"-T player -vppasswordstart "C:\Users\Administrator\Documents\VirtualMachines\win.vmx"nogui
the virtual machinestarts, butI do not havethe GUI andI have noway to accessthe machine (the virtual machinehas nonetwork).
question:is there away to start an encrypted machine with a command line that includes the password and access it normallyfrom thehost machine?
Thank you for your help!
↧
esxi not recognize my hd with data
Hello everybody,
I´m using a vmware esxi 5.1 in a HD with 1Tb.It´s only esxi.
I have more two hardisk with datas.
How can I use this other two hardisk in esxi without lost any files.
↧
↧
Re: Supermicro X9SBAA-F with a Atom S1260
Nope. The keyboard doesn't work during the installation.
↧
Vsphere 5.1 And Windows 2008 R2, Define a disk grater than 2TB
The iscasi volume on Equalogic is 6TB, so i want to give the whole 6TB
On Windows 2008 R2, have defined disk GPT but Vsphere does not let me write more than 2TB, how can i do it, thanks
↧
Re: While executing verify , Getting "Failed to execute createHOMObj for the Setup : Error on Connection to host (vCenter IP)"
Hi ,
I am facing the same/similar issue while trying to run workbench tests
I am getting the error s as below
[May 25 2013 20:10:52 : TRANSPORT ] [0] FRAMEWORK: Executing cmd ':216:cd ///tmp/OefRaxsodZ/; zip -r "/workspace/TestSessions/new_cert.d/Verify/20130525200829/storage50-cert/VTAF/Test/Storage/StorageCert/Verify_May_25_2013_20.08.37_21118/zip//Verify.xml_May_25_2013_20.08.37_21118.zip" *' in blocking mode on host 'localhost'...
[May 25 2013 20:10:52 : STAFBASE ] [0] FRAMEWORK: Executing STAF command: staf localhost PROCESS START SHELL SAMECONSOLE RETURNSTDOUT RETURNSTDERR WORKDIR / WAIT COMMAND :216:cd ///tmp/OefRaxsodZ/; zip -r "/workspace/TestSessions/new_cert.d/Verify/20130525200829/storage50-cert/VTAF/Test/Storage/StorageCert/Verify_May_25_2013_20.08.37_21118/zip//Verify.xml_May_25_2013_20.08.37_21118.zip" *
[May 25 2013 20:10:53 : STAFPROCES] [0] FRAMEWORK: Host localhost returned adding: esxia/ (stored 0%)
adding: esxia/var/ (stored 0%)
adding: esxia/var/log/ (stored 0%)
adding: esxia/var/log/vmkernel.log (deflated 6%)
adding: esxia/var/log/hostd.log (deflated 71%)
adding: local/ (stored 0%)
adding: local/tmp/ (stored 0%)
adding: local/tmp/Fs4CYYKngB/ (stored 0%)
adding: local/tmp/Fs4CYYKngB/vtafTestConfigFile.xml (deflated 87%)
adding: localhost/ (stored 0%)
adding: localhost/tmp/ (stored 0%)
adding: localhost/tmp/staf/ (stored 0%)
adding: localhost/tmp/staf/lang/ (stored 0%)
adding: localhost/tmp/staf/lang/java/ (stored 0%)
adding: localhost/tmp/staf/lang/java/jvm/ (stored 0%)
adding: localhost/tmp/staf/lang/java/jvm/VTAFVMJVM/ (stored 0%)
adding: localhost/tmp/staf/lang/java/jvm/VTAFVMJVM/JVMLog.1 (deflated 88%)
adding: localhost/tmp/staf/lang/java/jvm/VTAFHOSTJVM/ (stored 0%)
adding: localhost/tmp/staf/lang/java/jvm/VTAFHOSTJVM/JVMLog.1 (deflated 89%)
adding: localhost/var/ (stored 0%)
adding: localhost/var/log/ (stored 0%)
adding: localhost/var/log/messages (stored 0%)
adding: Verify.xml_May_25_2013_20.08.37_21118.log (deflated 89%)
[May 25 2013 20:10:53 : FILEUTILIT] [0] FRAMEWORK: PutCleanup - called with tag ///tmp/OefRaxsodZ/
[May 25 2013 20:10:53 : STAFFS ] [0] FRAMEWORK: STAFDirectoryExists: Testing directory localhost:///tmp/OefRaxsodZ/
[May 25 2013 20:10:53 : STAFBASE ] [0] FRAMEWORK: Executing STAF command: staf localhost FS GET ENTRY :18:///tmp/OefRaxsodZ/ TYPE
[May 25 2013 20:10:53 : STAFFS ] [0] FRAMEWORK: STAFDirectoryExists: Testing directory localhost:///tmp/OefRaxsodZ/
[May 25 2013 20:10:53 : STAFBASE ] [0] FRAMEWORK: Executing STAF command: staf localhost FS GET ENTRY :18:///tmp/OefRaxsodZ/ TYPE
[May 25 2013 20:10:53 : STAFFS ] [0] FRAMEWORK: STAFDeleteDirectory: Deleting directory localhost:///tmp/OefRaxsodZ/
[May 25 2013 20:10:53 : STAFBASE ] [0] FRAMEWORK: Executing STAF command: staf localhost FS DELETE ENTRY :18:///tmp/OefRaxsodZ/ RECURSE CONFIRM
[May 25 2013 20:10:53 : FILEUTILIT] [0] FRAMEWORK: PutCleanup - called with tag <all>
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: ----------------- Test Summary ----------------
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: LogDirectory : /workspace/TestSessions/new_cert.d/Verify/20130525200829/storage50-cert/VTAF/Test/Storage/StorageCert/Verify_May_25_2013_20.08.37_21118/logs/
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: TestResult : FAIL
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: ZipDirectory : /workspace/TestSessions/new_cert.d/Verify/20130525200829/storage50-cert/VTAF/Test/Storage/StorageCert/Verify_May_25_2013_20.08.37_21118/zip/
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: StartTime : May 25 2013 20:08:40
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: EndTime : May 25 2013 20:10:53
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: Duration : 0 day(s) 0 hr(s) 2 min(s) 13 secs
[May 25 2013 20:10:53 : UTILITY ] [0] INFO: -----------------------------------------------
[May 25 2013 20:10:53 : MAIN ] [0] ERROR: Trouble creating test instance, Failed to execute processSetup for the Setup : Failed to execute createHOMObj for the Setup : No GuestOS section in XML file
[May 25 2013 20:10:53 : FILEUTILIT] [0] FRAMEWORK: PutCleanup - called with tag <all>
I have already changed all names to lowercase. workbench can do a stafping to all hosts and vms
[vmware@workbench123 ~]$ ./stafping
+ staf local ping ping
Response
--------
PONG
+ staf esxia.celab.local ping ping
Response
--------
PONG
+ staf esxib.celab.local ping ping
Response
--------
PONG
+ staf vcenter.celab.local ping ping
Response
--------
PONG
+ staf workbench123.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm1-win-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm2-win-bus.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm3-win-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm4-win-pvs.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm5-lin-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm6-lin-bus.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm7-lin-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxia-vm8-lin-pvs.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm9-win-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm10-win-bus.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm11-win-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm12-win-pvs.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm13-lin-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm14-lin-bus.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm15-lin-lsi.celab.local ping ping
Response
--------
PONG
+ staf esxib-vm16-lin-pvs.celab.local ping ping
Response
--------
PONG
↧
Simulate a device status of disconnected in Workstation v.9?
I am trying to find a way to simulate a device status of disconnected in Workstation v.9. I could probably stop/start the network service inside a guest but I'm looking for something more disruptive.
Any suggestions how to do that via the VIX API?
Gary
↧
↧
Re: Welcome!
Hoping to get to 10,000 points this week and with the release of VCHS, I think I can do that pretty easily 
↧
Re: Network Bridged connection question
Make sure ubuntu has that nic set up and operational and probably you want it to use dhclient to obtain an IP.
If your host machine uses DHCP then your guest should as well. If you manually assign IP addresses for your host machine
you will need to do that in Ubuntu as well. You have to make sure that your router (or what ever) will assign the IP, that it doesn't have some hard coded limit or mac address filtering going on.
Check with ifconfig to make sure that the ubuntu nic has an IPV4 address.
Also in the VM settings, make sure that the Bridged Virtual Nic is set to connect at power on.
↧
Backup Errors with backing up thin provisioned disks on ESXi 5.1
Hi
I try to setup a backup solution for two little servers running in ESXi 5.1. (free edition).
I installed and configured the ghettoVCB successfully and everything seemed to be ok.
However, when I start to create a backup, the process would terminate with an error :-(
It does not matter whether the server is on or off, I get the same result.
All datastores are local, 2 x WD500GB with plenty of free space.
There is no snaphot, nothing that could (in my eyes) prevent a proper backup.
The server is running perfectly, when switched on.
I would appreciate any helpful feedback. Thanks in advance! The log is attached.
/vmfs/volumes/519fceb8-3d39150e-2d0f-001999eeb339/ghettoVCB-master # ./ghettoVCB.sh -f vms_to_backup
Logging output to "/tmp/ghettoVCB-2013-05-25_20-56-28-324192.log" ...
2013-05-25 20:56:29 -- info: ============================== ghettoVCB LOG START ==============================
2013-05-25 20:56:29 -- info: CONFIG - VERSION = 2013_01_11_0
2013-05-25 20:56:29 -- info: CONFIG - GHETTOVCB_PID = 324192
2013-05-25 20:56:29 -- info: CONFIG - VM_BACKUP_VOLUME = /vmfs/volumes/Backups/ghettoBackups
2013-05-25 20:56:29 -- info: CONFIG - VM_BACKUP_ROTATION_COUNT = 3
2013-05-25 20:56:29 -- info: CONFIG - VM_BACKUP_DIR_NAMING_CONVENTION = 2013-05-25_20-56-28
2013-05-25 20:56:29 -- info: CONFIG - DISK_BACKUP_FORMAT = thin
2013-05-25 20:56:29 -- info: CONFIG - POWER_VM_DOWN_BEFORE_BACKUP = 0
2013-05-25 20:56:29 -- info: CONFIG - ENABLE_HARD_POWER_OFF = 0
2013-05-25 20:56:29 -- info: CONFIG - ITER_TO_WAIT_SHUTDOWN = 3
2013-05-25 20:56:29 -- info: CONFIG - POWER_DOWN_TIMEOUT = 5
2013-05-25 20:56:29 -- info: CONFIG - SNAPSHOT_TIMEOUT = 15
2013-05-25 20:56:29 -- info: CONFIG - LOG_LEVEL = info
2013-05-25 20:56:29 -- info: CONFIG - BACKUP_LOG_OUTPUT = /tmp/ghettoVCB-2013-05-25_20-56-28-324192.log
2013-05-25 20:56:29 -- info: CONFIG - ENABLE_COMPRESSION = 0
2013-05-25 20:56:29 -- info: CONFIG - VM_SNAPSHOT_MEMORY = 0
2013-05-25 20:56:29 -- info: CONFIG - VM_SNAPSHOT_QUIESCE = 0
2013-05-25 20:56:29 -- info: CONFIG - ALLOW_VMS_WITH_SNAPSHOTS_TO_BE_BACKEDUP = 0
2013-05-25 20:56:29 -- info: CONFIG - VMDK_FILES_TO_BACKUP = all
2013-05-25 20:56:29 -- info: CONFIG - VM_SHUTDOWN_ORDER =
2013-05-25 20:56:29 -- info: CONFIG - VM_STARTUP_ORDER =
2013-05-25 20:56:29 -- info: CONFIG - EMAIL_LOG = 0
2013-05-25 20:56:29 -- info:
2013-05-25 20:56:35 -- info: Initiate backup for W2003-Server
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/519fceb8-3d39150e-2d0f-001999eeb339/w2003-server(2)/w2003-server(2)_1.vmdk'...
Clone: 36% done.
2013-05-25 20:59:34 -- info: ERROR: error in backing up of "/vmfs/volumes/519fceb8-3d39150e-2d0f-001999eeb339/w2003-server(2)/w2003-server(2)_1.vmdk" for W2003-Server
Destination disk format: VMFS thin-provisioned
Cloning disk '/vmfs/volumes/WD500GB-1/W2003-Domäne/w2003-server(2).vmdk'...
Clone: 66% done.
2013-05-25 21:08:59 -- info: ERROR: error in backing up of "/vmfs/volumes/WD500GB-1/W2003-Domäne/w2003-server(2).vmdk" for W2003-Server
2013-05-25 21:08:59 -- info: Backup Duration: 12.40 Minutes
2013-05-25 21:08:59 -- info: ERROR: Unable to backup W2003-Server due to error in VMDK backup!
2013-05-25 21:09:00 -- info: ###### Final status: ERROR: No VMs backed up! ######
2013-05-25 21:09:00 -- info: ============================== ghettoVCB LOG END ================================
/vmfs/volumes/519fceb8-3d39150e-2d0f-001999eeb339/ghettoVCB-master #
↧
More Pages to Explore .....
